Exoterra Natural Terrarium Nano Tall 8"WX8"Dx12"H 20 × 20 × 30 cm 
EXO TERRA Gex EXOTERRA Moisture Control and Mold Prevention Plate
MRP ₹1,049.00 Inclusive of All taxes
Indications
This product is for reptiles and amphibians. Do not use for other purposes. Keep out of reach of children and people with dementia. This product is a fragile item. Strong impact may result in cracks and cut your hands. Do not use if broken. Since it uses natural ingredients, there may be unevenness, variations or speckles, but this does not indicate a quality problem. As it is baked, there may be minor chips and scratches. Due to its porous structure, it may stain if the pigment deposits due to the surface of the flooring, but it does not affect its performance. If used in an organism type that excavates flooring, it is possible to dig back the plate
Ingredients
Clay, bacillus bacteria
Directions
According to the size and biological characteristics of your cage, please use the number of sheets you like under the floor. If you are concerned about the powder on the plate surface, please wash it lightly before use. Please do not use detergent. When adding humidity: Soak the plate in water for about 10 seconds, then place it under the floor. We recommend installing it under a shelter where you want to increase the humidity inside the cage. After installation, apply more moisture from the top of the floor material to the plate with a spray spray. When moisture is concerned about: Place the plate under the flooring while it is dry. We recommend placing it under a water dish or food dish where moisture or mildew is a concern. This product supports humidity management in the cage, and it does not provide complete moisture control with this product alone. Please check the humidity inside the cage with a hygrometer etc. There may be cases where mold generated by leftovers and droppings may not be suppressed. Even if it gets dirty, the effects of bacteria will last, but please replace it if you are concerned about stains or odors. For hygienic use, remove it from the cage and wash it with water and dry it in the sun
Simply place it under your substrate! Prevents excessive dryness in your cage! “Moisture-regulating, mold-resistant plate (Moist Keeper)”
absorbs excess moisture to keep it dry, and releases it when dry to maintain humidity.
Contains bacteria to suppress mold growth .
Humidity control is important for the healthy upbringing of reptiles; too little humidity can cause shedding problems, while too much moisture can cause mold and skin diseases.
In cages, excessive dryness from heater use and wetting of the substrate from watering can easily occur, so it is important to create a comfortable environment for reptiles.
●Made of porous ceramic, by placing it under the substrate or kitchen paper, it absorbs excess moisture, prevents sogginess, and slowly releases that moisture, maintaining high humidity around the plate for a long time.
●The plate is generously infused with live bacteria. The bacteria, activated by humidity, move to the substrate and suppress mold growth. *Not effective against all types of mold.
<How to use>
●Place as many plates as you like under the substrate, according to the size of your cage and the characteristics of your reptile. If you are concerned about powder on the surface of the plate, rinse it lightly with water before use. *Do not use detergents.
●To add humidity: Soak the plate in water for about 10 seconds, then place it under the bedding. We recommend placing it in areas where you want to increase humidity in the cage, such as under a shelter. After placement, spray plenty of water onto the plate from above the bedding.
●If you are concerned about moisture: Place the plate under the bedding when it is dry. We recommend placing it in areas where moisture and mold are a concern, such as under water dishes or food dishes.
*This product is intended to support humidity control in the cage, but it cannot completely control humidity on its own. Please use it while checking the humidity in the cage with a hygrometer, etc.
●Mold that grows on leftover food or feces may not be completely suppressed.
●The effect of the bacteria will last even if it gets dirty, but replace it if you are concerned about dirt or odor.
●To keep it clean, remove it from the cage about once a month, wash it with water, and dry it in the sun.
Main unit size: Approximately 18.0cm wide x 9.0cm deep x 0.8cm high.
Be the first to review “EXO TERRA Gex EXOTERRA Moisture Control and Mold Prevention Plate”
Related products
Reviews
There are no reviews yet.